Researchers at King Abdullah University of Science and Technology (KAUST) have developed a coating for overhead power cables that could let lines in the Kingdom carry more electricity during the hottest months, Arab News reported on Friday, 20 November 2026.
The problem is simple physics. “Overhead power lines are heated both by direct sunlight and by the electrical current flowing through them,” said Kai Xu, a postdoctoral fellow at KAUST and first author of the study. When a conductor gets hotter, its resistance rises and so do losses, Saudi electrical engineer Nada Battyour told the paper.
The KAUST coating is a mix of silicone and boron nitride particles. It reflects most incoming sunlight, sheds heat as infrared radiation and, unlike radiative cooling paints made for building roofs, lets the heat generated inside the conductor reach the surface. It can be applied to existing cables.
Outdoor tests at midday, with no current flowing, showed coated cables running about 5 degrees Celsius cooler than bare cables and 15 degrees cooler than conventional insulated ones. In simulations of a Saudi summer with air temperatures near 45 degrees, coated cables stayed between 50 and 70 degrees, while bare cables reached up to 90 and insulated cables up to 80.
Modeling for Riyadh suggests lines could carry about 10 percent more electricity on average in daytime across the year, and up to 18.3 percent more in the peak of summer. Across 13 hot-climate cities worldwide, the modeled daytime gain was 6 to 10 percent.
The research group is led by Qiaoqiang Gan, professor of materials science and applied physics at KAUST, and worked with King Abdulaziz City for Science and Technology and Beijing University of Chemical Technology. The results were published in the journal Light: Science and Applications. In durability tests, the coating kept its optical properties after 1,000 sandpaper abrasion cycles and 240 hours of accelerated ultraviolet aging.
The coating is still a proof of concept and has not been tested on an operating transmission line. Gan described conductor cooling as one complementary solution for the grid, not a complete answer. Xu said verified energy and carbon savings for a full network have yet to be established and will depend on conductor type, current, line length, climate and the generation mix. The team has held meetings with Saudi Electricity Co. about its cooling technologies.
